Phototex Colour Swatch

Intended to be stuck to smooth surfaces only: painted walls, glass, melamine furniture etc.

Ensure that surfaces are dry, clean, and free from dust, dirt or grease before applying product.

Store on the original backing paper or on another clean, smooth surface.

Keep the adhesive side of your sticker clean and free of debris.

You must wait 30 days after painting before installing Phototex®.

Paints that are low in Volatile Organic Compounds (VOCs) are now the most commonly available wall paint; Please note that self-adhesive products may not stick to these painted surfaces or certain plastics.

If you are unsure about the suitability of our products, please test with this Phototex® colour swatch.

Please note that self-adhesive products may not stick to certain painted surfaces or some plastics.

Be aware that if you stick Phototex® to paper it is likely to tear or be damaged when removed.

You must not place this item within 1 metre of a cot or bed of a child under 2 years of age.

Toys (Safety) Regulations 2011:Great Britain.

This item is NOT a toy, it is NOT designed or intended for use in play by children of less than 14 years of age.

ECO-UV5 inks and Phototex® are tested to be safe.

ECO-UV5 inks are tested to EN 71-3 :2019 Safety for toys. Part 3: Migration of certain elements. LINK

ECO-UV5 inks are GREENGUARD Gold UL2818 certified. LINK

Phototex® is tested to comply with USGBC LEED Version 4, BD&C, ID&C standard for green building design, construction, operations and performance. LINK 1   LINK 2

TESTING CAN CAUSE DAMAGE: always test on an inconspicuous section of the wall that’s normally hidden such as behind a piece of furniture.

STEP 1: Clean a small area of the wall with a lint-free soft cloth dampened with tap water and allow to dry.

STEP 2: Apply Phototex® sample to the cleaned surface.

STEP 3: Wait 48 hours to see if it remains in place.

If unsuccessful, AT YOUR OWN RISK, you could try the following advice from 3M on a VERY SMALL INCONSPICUOUS AREA OF WALL.

WARNING! The following advice from 3M for low VOCs paints MAY CAUSE DAMAGE OR REMOVE PAINT.

STEP 4: Clean the wall TWICE with a mixture of 70 percent isopropyl alcohol (IPA) and 30 percent water, this can significantly boost adhesion for nearly any wall film applied to a painted substrate.

STEP 5: Repeat steps 2 and 3.

We manufacture all of our products in-house.

Our products are fully customisable, especially colours and pattern sizes.

We can print and frame using an infinite combination of materials.

If you would like a design printed, let us know what you would like and we will make it for you.

If you need a single piece or an entire collection for domestic or commercial spaces contact us to find out how we can help.